Can you use stereo speakers on a computer

The jack you need on a computer is often color-coded with green and a symbol as shown in the photo above. However, most of the time the headphone jack can be used. The headphone jack is also a stereo connector with a 3.

I used an inexpensive mini amp to drive bookshelf speakers with excellent results. A home stereo system often provides an AUX input feature to allow connecting to any sound source you have. With a home receiver you can also take advantage of surround sound functions as well as rear speaker or subwoofer use, too. As most laptops these days include built-in Bluetooth connectivity, this is a great way to get sound without cables.

Plug one end of the cable to the plugs with matching colours on the speaker and the other end to the matching colours on the amplifier. Repeat this process for the other speaker. Connect the power cable that came with the amplifier and plug it into the power socket.

Press the power button on the amplifier, and play some music on the PC. If you connected everything and all components work, you should be able to crank up the volume more than ever. Many people spend hours upon hours in front of their PCs. Some want to hear a bit higher volume when listening to music or watching videos on their computer. Headphones are just for you.

The 2. If you have a pair of old stereo speakers lying around, you can hook them up to your PC and have an excellent and loud stereo system. To do this, you will need a power source. Go and buy a compact stereo amplifier.

It is small, inexpensive, but powerful. They usually deliver between W per channel. Therefore, to properly connect a speaker to a computer, a digital-to-analog converter DAC must be put between the two. There are instances when the computer is properly connected to its speakers, but the audio is not getting sent properly. This is an important piece of information to mention early in this article.

Speaker driver: A speaker driver is the transducer element of the speaker responsible for converting electrical energy analog audio signals into mechanical wave energy sound waves. We may have to install the necessary computer drivers to use the USB speakers. Many will work as plug-and-play without a manual driver install.

Oftentimes the computer will automatically select the USB speaker s as its audio output device the moment the connection is made. For example, the Lightning cable is a common digital hardwired connection with Apple iPhones. Computer sound cards act as internal audio interfaces. If the computer has a headphone output, its sound card will even have a DAC.

Note that the speakers connected this way should either have internal amplifiers or there should be an amplifier put in line. To connect to the internal audio interface of the computer, we must locate an analog output. This, again, is typically the 3. Using a 3. Plug one end of the cable into the computer and the other end into the speaker.

Sometimes the speaker with have a difference size plug and a size adapter will be required to properly connect to the speaker. Other audio outputs can be used to connect computers to speakers via the internal audio interface. With this type of connection, the signal flow is as follows: the computer plays a digital audio signal; the signal is converted into analog audio by the internal DAC; this analog signal is sent out the headphone jack and through the audio cable to the connected speaker.

Don't expect to be able to clean up this sort of thing. It isn't the fault of the sound card if the tape is messed up. Monitor the tape decks output if you suspect the tape is damaged. OK, so now, presumably you are ready to record. Different software will use different procedures, but it's all pretty similar. First you "Arm" set record check box to on, not hit the record transport button on the tracks you want to record on.

A single channel is often set to record in stereo - read the manual or help file for your software! Monitor the input levels to make sure you're levels are ok. Some high quality cassette decks have a RTZ return to zero button which is really helpful to set up starting the tape just before the song starts.

Use it! You will want to Hit the record button on the software just before hitting "play" on the cassette deck. Stop recording when the song is done, or if you are recording a whole side at once, when the side is complete. Carefully monitor the results for distortion or noise levels. Repeat as needed. Extremely large and detailed document on all kinds of analog audio equipment. See section: Analogue tape reproduction. This is a very hot topic at the moment with the resurgence of Vinyl, plus all of those who want to transfer their records to their computers to burn to CD, or put on their MP3 players or Ipods.

The first thing you have to understand is that you cannot connect a turntable directly to your computer. A phono cartridge puts out an extremely small signal, which has a rather strange frequency response curve due to RIAA equalization. A phono preamp is required to boost the signal and "straighten out" the frequency response.

This is why you must plug a turntable into the "phono" input of a receiver or preamplifier rather than the "Line" or Tape inputs. Besides that, there are different types of cartridges the needle and cartridge create the electrical signal from the grooves.

There are moving coil, moving magnet and ceramic cartridges, generally, which need different preamp settings, or possibly different preamps. Moving Magnet cartridges are the most common type, especially from current, while moving coil cartridges are often favored by audiophiles.

Ceramic is the old, cheap cartridges used turntables you would not want anyway. An input on a receiver or preamp that does not specify is usually moving magnet ready. There are also high output moving coil cartridges that will work on moving magnet preamps. Just a bit annoying? Well, there's always more - depending on how deep you want to go Impedance matching is another hot topic with cartridges and preamps.

Frequency response of cartridges can be affected by output to input impedance interaction with preamps. OK, that's deep enough; see the links below for more in-depth information. More Info:.